Möbelstücken, Briketten, Biomasseofen, Gabrovsek Grca

On the basis of our experience with biomass furnaces and our belief that biomass is the energy source of tomorrow, which is still not enough used, we gained representation for selling the furnaces of the Europe’s leading manufacturer of biomass boilers, NOLTING company from Germany. Our experience and maintenance team, qualified for assembling and maintenance, assures economically and ecologically suitable solution for burning biomass at its source – that is at the place, where waste is produced. For some more information do not hesistate to contact us:franc.gabrovsek@siol.net

You can learn more about NOLTING biomass furnaces on the following web site: http://www.nolting-online.de

Due to thorough burn-out of the biomass in modern boilers at high temperatures with the 79 to 85 % efficiency, the percentage of other substances that pollute the environment (soot, CO, SO2 etc.) is also reduced. High temperatures in especially designed boilers for biomass enable burning of pitch, essential oils and other solid material, whereas in the common boilers it is left at the sides of the firebox as soot and as black, sticky cover. This cover is called tar and contains a lot of unused energy.

Heating with biomass has several important advantages:

Efficiency of modern biomass boilers is so high that they burn half the wood (biomass) that old boilers do.
The boilers are constructed in the way that any wood waste can be used as fuel in the equal way.
The boilers are connected to bigger storage batteries. It is therefore sufficient to feed the boiler once or twice daily; bigger objects, however, are fed automatically.
By heating with biomass the environment is not burdened with additional emissions of CO2.

It is important to choose a suitable boiler for the type of biomass (chippings, briquettes, chips, waste …) we have at our disposal. All the boilers provide high-temperature combustion and thus a high efficiency and suitable accumulation.

The use of boilers that are common today takes a lot of time. Biomass boilers have bigger fireboxes and adapted storage battery, where the heat energy is stored for the time, when there is no combustion in the boiler. It is enough to feed the fuel only once a day or maybe twice a day when it is really cold, which saves up time. Circulation pump and proper regulation are then responsible that the heat stored in the storage battery keeps our home evenly warm throughout the day.

In urbanised areas, where it is reasonable to have district heating, the feeding of boilers with higher capacities is performed automatically. Processing regulation takes care for regular feeding and combustion and contacts the maintenance team via telephone line if an error occurs. Contracting parties bring the agreed type and amount of biomass to waste disposal site (chippings, bark, briquettes etc.) where a weighing machine registers the amount of biomass. Automatic dosage augers (or similar devices) at waste disposal site then transport the biomass to the firebox.

Bigger devices usually have two or three boilers and in the transitional period it is possible to heat only with one or two boilers, which causes higher efficiency. The minimum amount of ash, which is the product of good combustion, is usually used for fertilizing and improving the land.

NOLTINGÖFEN:

Die automatische Unterschub-Feuerungsanlage Typ LCS
Kesselleistung: 45 - 270 KW

	Ausgelegt für alle Brennstoffe nach der 1. BlmSchV (Gruppe 5-7)
	Geeignet für alle Heizungsanlagen nach DIN mit einer Betriebstemperatur bis 90 °C
	Getrennte Verbrennungsluftventilatoren mit Drehzahlregelung
	Senkrechte Heizflächen in denen keine Asche liegen bleibt
	Gewährleistung der Emissionen nach der 1. BlmSchV

Automatische Holzspäne-FeuerungsanlageTyp NRF
Kesselleistungen: 45 - 835 kW

	Anerkannte und tausendfach bewährte Feuerungstechnik
	Garantierte Unterschreitung der Grenzwerte entsprechend 1. BlmSChV, auch im Teillastbereich
	Optimaler Nutzen der Verbrennungsernergie durch die senkrechten Heizflächen der Vierzugtechnik
	Sehr wartungs- und servicefreundlich
	Minimierte Schadstoffemissionen dank hervorragendem Ausbrand
	Mehr Umweltschutz mittels Steuerungselektronik
	Größtmögliche Sicherheit durch zahlreiche Prüf- und Regelkreise
	Große Wirtschaftlichkeit im laufenden Betrieb

Typ	Leistungen	Zufuhr	Entaschung	Entstaubung
NRF/ NRK	45- 835 kW	elektronisch geregelt	Verbrennungsretorte automatisch	Fliehkraftabscheider

Automatische Vorschubrost-Feuerungsanlage Typ VRF
für Biomasse (z.B. Holzspäne, Holzhackschnitzel, Rinden)
Kesselleistungen: 215 - 4100 kW

	hydraulisch bewegter Vorschubrost
	verschleissarme, hitzebeständige Roststäbe
	Vorschubgeschwindigkeit des Rostwagens regulier- bar
	Wartungsarme Heisslagertechnik
	liegender Rauchrohrkessel mit Wendekammer
	grosszügig dimensionierte Reinigungstüren
	Brennkammer mit wasserführenden Stahldoppelmantel und dicker Schamottierung
	Brennkammer mti Geölbedecken
	Wechselbrandmöglichkeit mit Öl / Gas
	automatische Entaschung als Option für Rostascheraum, Feuerraum und Staubabscheider

Typ	Leistungen	Einschub	Entaschung	Entstaubung
VRF	215-4100 kW	elektronisch geregelt	Feuerraum, Entstauber, Rostascheruam automatisch als Option	Fliehkraftentstauber (Option: E-Filter, Gewebefilter)